EV charging stations for housing cooperatives and parking facilities
EV CHARGING FOR PARKING FACILITIES WITH NUMEROUS SPACES
ZapCharger Pro charging station
Dimensions and weight
H: 392 mm, W: 258 mm, D: 112 mm
Weight: approximately 5 kg (including backplate)
Max charging current and power
7.36 kW* at 32A single phase
22 kW* at 32A three phase (applies only to TN networks)
Built-in 3 x 40A type C fuses
IEC 62196-2 Type 2 Female
Earth fault protection
Built in RCD type B
Calibration and self-test are performed prior to start of every charge cycle. The RCD is automatic reset by unplugging the charging plug.
Limits the inrush current at the start of charging.
Integrated in the charging station with an accuracy of +/-1 % on current and voltage. This enables the user to check the actual power usage. In an installation, the consumption report can be used to distribute the cost based on use.
The front cover of the ZapCharger Pro can only be opened with a special tool. The charging cable can be permanently locked with the charging station.
In a system with other identical charging stations, the units will select the least loaded phase for one phase charging or use all three phases for 3-phase charging.
In a system with other identical charging stations, the power available in the installation will be shared between the units by adjusting the phase current and phase distribution dynamically.
Communications interface and cloud connection/network
WiFi 2.4 GHz, IEEE 802.11 b/g/n (channels 1-11)
PLC – HomePlug Green PHY®, 10 Mbit/s
Identification and configuration
Bluetooth Low Energy (BLE 4.1)
*32A current is available but limited by the temperature build up inside the charging station.
See all specifications on our product sheet
ZapCharger Pro product sheet
Specifications for backplate
By using our charging station you can charge your EV up to a mileage of 110 kilometres in only one hour
Use the power more efficiently with charging solutions from ZAPTEC.
The charging system uses all available capacity and distributes it intelligently across the charging stations. Up to 22kW is possible for each charging station.
Columns for easy outdoor installation
Choose between two types of columns for outdoor charging station installations.