Electric vehicle charging

Intelligent and scalable charging solution for electric vehicle charging

Limited power available for charging your electric car?

Use the power more efficiently with ZAPTEC’s charging solution. Through unique Norwegian technology, you get the fastest possible charging load of your electric car and utilize available capacity in a cost-effective manner.

The charging solution uses all available capacity and balances it intelligently between the charging stations. Get up to 22kW on each charging station.

Unique Scalability for EV charging

A ZAPTEC charging system prepare all the parking spaces for EV charging and allows for new charging stations to quickly be connected to the infrastructure.

The housing company starts with an investment in common infrastructure for EV charging, and then residents can buy their own charging station whenever they wish. This way everyone will have the possibility to get EV charging in the future.

Making your building or garage EV ready has never been easier!

Fair use

Each charging station has a built-in energy meter that measures the power consumption.

In a shared garage or parking lot, consumption is easily assigned to the user and billing can be done manually from the ZapCloud portal or through our partners’ automatic payment solutions.

READ MORE

Safe EV Charging

In ZapCharger Pro, safety is built into the charging station, with a type 2 connector, integrated fuses and earth fault protection.

Get a simpler and safer installation with ZapCharger Pro.

READ MORE

Future proof

All charging stations are connected to our cloud solution, ZapCloud through the internet.

Software updates allow technology to be improved and ensures operational monitoring of each charging point for stable and safe operation.

READ MORE

Our cloud solution ZapCloud is ready for the future

Charging stations are connected to our unique ZapCloud technology, which enables us to meet all future challenges. ZapCloud is the brain behind our smart charging system and monitors, balances and optimizes load between charging stations at all times.

ZapCloud is based on Microsoft’s Azure technology, which ensures a safe, fast and scalable platform.

The features of ZapCloud are continually improved and, along with updates over the Internet, comprehensive APIs, real-time overview, reporting features and more, we’re ready to deliver tomorrow’s charging station today.

Columns for easy outdoor installation

ZapCharger Column Standard and ZapCharger Column Premium comes in two variants, Single and Twin. With Single you can have one charging station per column.

Do you want more flexibility, Twin column will allow you to mount two charging stations on one column.

What people say

“The ZAPTEC team responded extremely fast and in a very qualified way to our need. We could not be happier!”

Dr. Florian Kienzle,

Head of New Grid Solutions, Grid Concepts EWZ

“We have installed charging stations to handle up to 88 cars. I recommend ZAPTEC for everyone planning for EV charging in the future”

Ottar Helland

Chairman of the board Tjensås lll

“Cooperation with ZAPTEC has been an exciting and important journey for us”

Trond Thorbjørnsen

Innovation and R&D, Lyse AS

Technical Information

Dimensions and weight
H: 392 mm, W: 258 mm, D: 112 mm
Weight: approximately 5 kg (including backplate)

Max charging current and power
7.36 kW* at 32A single phase
22 kW* at 32A three phase (applies only to TN networks)

Fuses  
Built-in 3 x 40A type C fuses

Charging socket
IEC 62196-2 Type 2 Female

Earth fault protection
Built in RCD type B
Calibration and self-test are performed prior to start of every charge cycle. The RCD is automatic reset by unplugging the charging plug.

Softstart
Limits the inrush current at the start of charging.

eMeter
Integrated in the charging station with an accuracy of +/-1 % on current and voltage. This enables the user to check the actual power usage. In an installation, the consumption report can be used to distribute the cost based on use.

Theft protection
The front cover of the ZapCharger Pro can only be opened with a special tool. The charging cable can be permanently locked with the charging station.

Phase distribution
In a system with other identical charging stations, the units will select the least loaded phase for one phase charging or use all three phases for 3-phase charging.

Load distribution
In a system with other identical charging stations, the power available in the installation will be shared between the units by adjusting the phase current and phase distribution dynamically.

Communications interface and cloud connection/network
WiFi 2.4 GHz, IEEE 802.11 b/g/n (channels 1-11)
PLC – HomePlug Green PHY®, 10 Mbit/s

Identification and configuration
Bluetooth Low Energy (BLE 4.1)
RFID/NFC reader

*32A current is available but limited by the temperature build up inside the charging station.

See all specifications in our product sheet
ZapCharger Pro productsheet

Colour
Sort, RAL9017

Material
Steel

Surface treatment
Powder coated

Material connection box
ASA+PC

Degree of protection
UV resistant
UL94-5VA

Cable entry
20mm
Max 10mm² cable
Min 2.5mm² cable

Supplied cable seals
Ø14mm, Ø8mm and blind plug

Mounting to wall
4 pcs Ø 5mm hole

Size Single Column Standard:
H: 1550mm x B: 285mm
D: 85mm

Size Twin Column Standard:
H: 1550mm x B: 285mm
D: 230mm


Colour
RAL9005

Material
Steel and aluminum

Surface treatment
Steel: Hot-dip galvanized and powder coated
Aluminum: powder coated

Protection class
Class I must be connected to PE

Degree of protection
IK10

Cable entry
Ø100mm

Attach to ground
CC160mm, Ø24mm

Coupling
Coupling clamp kit included, 5 x 4×25 / 50mm2. Elnr: 3640853.

Mounting of charging station

The charging station’s backplate is attached to the column with 4 M4 screws and nuts. (Supplied)

Example of base – Vik Ørsta
Anchoring frame CC160, M20x400 (no. 3640400)
Dredging base CC160 M20 (no. 3640427)

Productsheet
ZapCharger Column Standard

Size Single Column Premium:
H: 1550mm x B: 285mm
D: 116mm

Size Twin Column Premium:
H: 1550mm x B: 285mm
D: 210mm


Colour 
Anodic Natura & RAL9005

Material 
Aluminium

Surface treatment 
Powder coated

Protection class
Class I must be connected to PE

Degree of protection
IK10

Cable entry 
180mm x 100mm at the bottom

Attach to ground 
CC160mm, Ø22mm hole

Connection box 
Included Abox-in 160-L, item no. 1243510

Connection 
Supplied coupling terminals, 5 pcs.
Elnr: 1221616, 1221617, 3x 1221615

Mounting of charging station 

The charging station’s backplate is attached to the column with 4 M4 nuts. (Supplied)

Lock the front cover
Standard panel lock, triangular

Example of base – Vik Ørsta
Anchoring frame CC160, M20x400 (no. 3640400)
Dredging base CC160 M20 (no. 3640427)

Productsheet
ZapCharger Column Premium

GET AN OFFER FOR AN EV CHARGING SOLUTION

Contact usFind dealer

Pin It on Pinterest