Columns for your outdoor installation – the choice is yours
There are three different charging columns to chose from. All can be mounted with two chargers on one column, or you can use the column for one charger.

MADE IN NORWAY
All products are developed, designed and produced in Norway
OUR COLUMNS
ONEPOLE
ONEPOLE comes as single and double, with or without lights and with or without a protective roof.
Material
Aluminum
Class I, must be connected to PE
Degree of protection
IK10
Measurement
100x100x1500mm
Cable entry
90x90mm
Attachment to the ground
CC160mm, 025mm x 4
Mounting of charging station
The charging bracket is attached to the column with 4 M4 nuts (supplied). The Zaptec back plate is to be attached to the charging bracket.
Example of base
Anchoring frame CC160, M20x400 (No.: 3640400)
Dredging base CC160/M20 (No.: 3640427)
Please note. Each bracket is in need of a Zaptec backplate to attach the charging station to the column.
Column Standard
Size Single Column Standard:
H: 1550mm x B: 285mm
D: 85mm
Size Twin Column Standard:
H: 1550mm x B: 285mm
D: 230mm
Colour
RAL9005
Material
Steel and aluminum
Surface treatment
Steel: Hot-dip galvanized and powder coated
Aluminum: powder coated
Protection class
Class I must be connected to PE
Degree of protection
IK10
Cable entry
Ø100mm
Attach to ground
CC160mm, Ø24mm
Coupling
Coupling clamp kit included, 5 x 4×25 / 50mm2. Elnr: 3640853.
Mounting of charging station
The charging station’s backplate is attached to the column with 4 M4 screws and nuts. (Supplied)
Example of base – Vik Ørsta
Anchoring frame CC160, M20x400 (no. 3640400)
Dredging base CC160 M20 (no. 3640427)
Productsheet
ZapCharger Column Standard
Column Premium
Size Single Column Premium:
H: 1550mm x B: 285mm
D: 116mm
Size Twin Column Premium:
H: 1550mm x B: 285mm
D: 210mm
Colour
Anodic Natura & RAL9005
Material
Aluminium
Surface treatment
Powder coated
Protection class
Class I must be connected to PE
Degree of protection
IK10
Cable entry
Ø180mm x 100mm in the bottom
Attach to ground
CC160mm, Ø22mm hole
Connection box
Included Abox-in 160-L, item no. 1243510
Connection
Supplied coupling terminals, 5 pcs.
Elnr: 1221616, 1221617, 3x 1221615
Mounting of charging station
The charging station’s backplate is attached to the column with 4 M4 nuts. (Supplied)
Lock the front cover
Standard panel lock, triangular
Example of base – Vik Ørsta
Anchoring frame CC160, M20x400 (no. 3640400)
Dredging base CC160 M20 (no. 3640427)
Productsheet
ZapCharger Column Premium

Charging stations for EV charging in multifamily houses, apartment buildings and parking facilities
Your safety is essential to us. Zaptec Pro is a Type 2 charging station that manages high loads over time. Each charging station therefore has integrated fuses, electronic ground fault protection, temperature sensors and over-current and over-voltage monitors to ensure the highest level of safety for both the user and the power grid.