Columns for your outdoor installation – the choice is yours

Looking for a column for Zaptec Go the onepole column is the solution. For Zaptec Pro you can choose between two column solutions.  All columns can be mounted with two chargers on one column, or you can use the column for one charger.

Zaptec charging columns

OUR COLUMNS

ONEPOLE 2.0

Zaptec offers eight readymade pedestals to meet your every EV charging needs. From one charging station up to four per pedestal. Including roof and options for area light. All made from high quality seawater resistant aluminium. Ready for any environment.

Onepole column works with both Zaptec Go and Zaptec Pro charging stations.

Material
Searesistant aluminum

Aluminum
Hydro

Weight
8,9kg

Surface treatment
Powdercoated
ISO 12944, Category C4

Measurement
1497x350x350mm

Protection class
Class I, must be connected to PE

Degree of protection
IK10 Color RAL9005 (Standard)

Electrical Connection
Connection point is in the charging stations back plate.
Connection between pedestals: ONEPOLE Connection kit.

Connection
5 pcs. 6×25/50mm² AI/CU.

Tested according to EN 60998-1:2004 and EN 60998-2-1:2004
Approved cross-section AL cable: 10-50mm²
Approved cross-section CU cable: 1.5-35mm²

Mounting
Up to two charging stations can be mounted on a single column without any additional brackets. To expand amount of chargers – additional brackets need to be attached.

Productsheet
Onepole 2.0 product sheet

Zaptec Column Premium

Zaptec Column Premium works with the Zaptec Pro charging station.

Size Single Zaptec Column Premium:
H: 1.460mm x B: 285mm
D: 112,9mm

Size Twin Zaptec Column Premium:
H: 1.460mm x B: 285mm
D: 210mm


Colour 
Grey or Black

Material
Aluminium

Surface treatment 
Powder coated

Protection class 
Class I must be connected to PE

Degree of protection 
IK10

Cable entry
Ø170x70mm in the bottom

Attach to ground  
CC160mm, Ø22mm hole

Connection box 
Included Abox-in 160-L, item no. 1243510
Included only in the twin column

Connection 
Supplied coupling terminals, 5 pcs.
Elnr: 1221616, 1221617, 3x 1221615
Included only in the twin column

Mounting of charging station 

The charging station’s backplate is attached to the column with 4 M4 nuts. (Supplied)

Lock the front cover
Standard panel lock, triangular

Productsheet
Zaptec Column Premium

Zaptec sikkerhet

Charging stations for EV charging in multifamily houses, apartment buildings and parking facilities

Your safety is essential to us. Zaptec Pro is a Type 2 charging station that manages high loads over time. Each charging station therefore has integrated fuses, electronic ground fault protection, temperature sensors and over-current and over-voltage monitors to ensure the highest level of safety for both the user and the power grid.

Get a quote on

EV Charging today